Conceptual rendering of CryoSurge LNG modules at a hyperscale datacenter campus
ArticUno LNG  ·  Datacenter Division

CRYOSURGE

Modular LNG power infrastructure for data centers — onsite gas from day one, no pipeline required.

60–120 days
equipment ready to ship
450,000 gal
LNG storage in inventory
~35% less
than new-build cost
581 MWh
per CryoSurge 4T module
The gap

Your generators are ready. The gas isn't.

Data centers are being built faster than gas utilities can connect them. Grid interconnection now averages 5.2 years in PJM — up to 7 years for a 100 MW hookup in Northern Virginia — while downtime costs large enterprises over $300,000 per hour, with 41% reporting $1–5 million per hour.

Diesel backup is no longer the answer: the EPA caps non-emergency diesel at 50 hours per year, California's SB 887/978 target datacenter diesel outright, and stored fuel degrades within 6–12 months. LNG does not degrade in storage — and gas generation cuts emissions 40–70% with dramatically easier NOx and PM2.5 permitting.

CryoSurge closes the gap with field-proven LNG storage and vaporization modules, in inventory today, that feed pipeline-quality natural gas to your onsite generation — first as primary supply while you wait for the pipeline, then as permanent backup once it connects.

The product

Two standardized modules. Any scale.

Each CryoSurge module combines vertical cryogenic LNG tanks, ACD TC-34 submersible cryogenic pumps, CryoQuip ambient vaporizers, interconnecting cryogenic piping, and a control container running Allen-Bradley CompactLogix + GuardLogix safety PLCs. Modules arrive pre-engineered, with site layouts pre-modeled to NFPA 59A siting and setback requirements, and commission on a concrete pad in a standard fenced utility yard.

Conceptual rendering of a CryoSurge 3T module

CryoSurge 3T

3 × 18,000-gal vertical tanks
Usable LNG45,000 gal
Stored gas3,690 MCF
Net electric energy436 MWh
Runtime @ 25 / 50 / 100 MW17.4 / 8.7 / 4.4 h
$978,000$1,517,000 new-build
Conceptual rendering of a CryoSurge 4T module

CryoSurge 4T

4 × 18,000-gal vertical tanks
Usable LNG60,800 gal
Stored gas5,022 MCF
Net electric energy581 MWh
Runtime @ 25 / 50 / 100 MW23.4 / 11.6 / 5.8 h
$1,143,000$1,750,000 new-build

Runtime per module, by facility load

Hours of full-load generation from one module at 40% net electric efficiency

CryoSurge 3TCryoSurge 4T
17.4 h
23.4 h
8.7 h
11.6 h
4.4 h
5.8 h
25 MW50 MW100 MW

Module cost vs. new-build equivalent

Same configuration, purchased new at current lead times (12–18 months) and tariff-driven prices

3T — new build
$1,517,000
3T — CryoSurge
$978,000
4T — new build
$1,750,000
4T — CryoSurge
$1,143,000
Savings: $539,000 per 3T module · $607,000 per 4T module — and the equipment ships now.
Why CryoSurge

Speed, reliability, provenance.

Immediate availability

New U.S.-certified cryogenic tanks quote 12–18 month lead times from Chart and Taylor-Wharton, with backlogs projected through 2027. CryoSurge equipment is in inventory — ready to ship in 60–120 days, with NFPA 59A permitting run in parallel by our EPC team.

Tariff-proof economics

The 2025 tariff stack on imported cryogenic vessels (10% baseline + 20% IEEPA + 125% reciprocal, plus Section 232 steel duties) pushed new U.S. tank pricing to $250,000–$350,000. CryoSurge prices ~35% below new-build.

Diesel is closing

The EPA caps non-emergency diesel at 50 hours/year; California's SB 887/978 target datacenter diesel, Washington capped one facility at 25 hours per generator, New York has a moratorium pending. Gas with LNG storage permits on 40–70% lower emissions.

Fuel that keeps

Diesel degrades in 6–12 months and needs constant fuel polishing (EPRI puts standby start-failure at 3–4%). LNG is chemically stable — and standby CryoSurge modules include active boil-off management, so fuel holds indefinitely without venting.

Tier III/IV alignment

Multi-day onsite fuel autonomy supports concurrent-maintainability and fault-tolerance design requirements for Tier III and Tier IV facilities.

Premium manufacturers

Tanks by Chart, CVA and Taylor-Wharton; ACD cryogenic pumps; CryoQuip vaporizers; Allen-Bradley safety PLCs. 2011–2021 service, minimal duty, professionally decommissioned, recertified before deployment.

Deployment scenarios

Primary gas today. Backup tomorrow.

1

Bridge to pipeline

Your interconnection is years away, but generation must run now. CryoSurge serves as primary gas supply, replenished by scheduled LNG trailer deliveries. When the pipeline connects, the modules stay as permanent backup — the asset changes mission, never becomes obsolete.

2

Integrated LNG + CNG supply

For sites fed by mobile CNG/VNG trailers, CryoSurge is the buffer that makes the scheme bankable: a 50 MW plant needs 12–13 trailer deliveries every day (25+ at 100 MW), so one delay can starve the turbines. While trailers cycle offsite, the module carries the load — continuous gas, no single logistics dependency.

3

Scale from pod to farm

Sizing rule of thumb: ~103 gallons of LNG per MWh generated. 25 MW draws ~206 MCF/hr; 50 MW ~411; 100 MW ~822.

Conceptual rendering of a CryoSurge module operating alongside CNG trailer delivery at a datacenter construction site

Conceptual rendering: CryoSurge module bridging supply while CNG trailers cycle offsite.

Deployment tierConfigurationSupports
Pod1–3 tanks (single module)10–25 MW
Mid-size farm5–10 tanks, N+1 piping25–60 MW · 24–72 hr runtime
Hyperscale farm10–20 tanks60–120 MW · 48–96+ hr runtime
Commercial options

Buy it, lease it, or hand us the whole scope.

Purchase

CryoSurge 3T $978,000 · 4T $1,143,000, refurbished and recertified. Volume: two 3T $1,956,000; three $2,934,000; four $3,912,000; four-unit 4T campuses to $4,572,000.

Long-term lease

5–10 year term with a predictable monthly fee per module; equipment maintained by ArticUno. Preserve capital while bridging to pipeline.

Turnkey EPC

Site design, permitting support, installation and commissioning — a single point of accountability for onsite gas.

LNG supply

Scheduled trailer deliveries and gas supply contracts for sites running CryoSurge as primary supply.

Service & maintenance

Ongoing O&M, recertification and 24/7 support across every deployment.

Equipment provenance

30 terminals. One fleet. Ready now.

CryoSurge modules are assembled from the complete equipment fleet of 30 professionally decommissioned LNG fueling terminals — one of the largest inventories of LNG equipment available for immediate deployment in the United States today.

30
vertical cryo tanks
~125
ACD TC-34 pumps
40+
CryoQuip vaporizers
16
new PLC control containers
18,000-gallon vertical LNG tank lifted by crane
18,000-gal vertical tank being set by crane
Rows of LNG tanks staged in a yard
Tank fleet staged at the Texas refurbishment yard
Dual cryogenic pump skid
ACD TC-34 dual cryogenic pump skid
Aluminum finned ambient vaporizers
CryoQuip ambient vaporizer inventory
Industrial control containers
Brand-new 10×10 LNG control containers
Allen-Bradley PLC racks inside a control container
Allen-Bradley PLC racks — fully populated, plug-and-play
Next steps

From first call to equipment onsite in 60–120 days.

  1. Site screening call — share your load profile, timeline and gas availability; we size the configuration.
  2. Budgetary proposal in 10 business days — configuration, purchase and lease pricing, deployment schedule.
  3. Equipment inspection — visit the Texas yard, or receive documentation, drawings and inspection reports.
  4. Contract and deployment — equipment ships in 60–120 days; NFPA 59A permitting and site works run in parallel under our EPC scope.
Gas Equipment 4 Sale — ArticUno LNG Datacenter Division1 (800) 716-6747 · dmitri@gasequipmentforsale.com

All equipment offered subject to availability. Specifications, capacities and runtimes are engineering estimates based on 40% net electric efficiency and LNG at 82,644 Btu/gal (LHV); final figures are confirmed per project. Renderings are conceptual. © 2026 Gas Equipment 4 Sale LLC — ArticUno LNG Datacenter Division. Specifications subject to change.